Blurry, but I filed off the center indicator and drilled the pilot hole for the rear brake.
The seat tube and bottom bracket is all shimmed and ready tostart fitting the down tube. Behind the bottom bracket you can see how I use feeler gage blades to set the correct dimension.
Exactly 73 degrees.
Starting to look like a bike frame. The rest of the week end is pretty busy, but hopefully I'll get the front triangle ready to silver braze on Monday.
You say that the Seat tube lug is drilled for the rear brake? Hmmm...very interesting....(as if I didn't know and wasn't ecstatic about it)
ReplyDeleteLooks really good, Neil!