I am actually getting work done on the mixte.

 The fork will be complete once the eyelets are brazed on.  The eyelet is sitting nicely in its pocket.

And I got the tab slots cut for the rockers.

I was concerned that the rockers are too big and will over power the small frame.  But, I think with the disc and large Alfine hub in the background it won't be an issue.  Also, I will polish the inserts and raised portions of the dropout.

 I have these points laying around, so I decided to make a decorative lug for the lateral struts

This is kinda what it will look like.  I will open the curves and finese the points like on the head tube lugs.